£19.35 per m²
781 in stock
| Style | |
|---|---|
| Shape | Square |
| Colour | |
| Size | 600 × 600mm |
| Material | Porcelain |
| Finish | Matt |
| Suitability | |
| Rectified Edge | Yes |
Calacuta matt tile 600×600 is a timeless white marble-effect porcelain tile with graceful soft grey veining and a calm matt surface. The matt finish, porcelain body and 600 × 600mm format give the design a clear specification as well as a distinctive look.
This tile is suitable for internal walls and floors. It can therefore be considered for bathrooms, kitchens, hallways, living rooms, bedrooms and internal feature walls, subject to correct substrate preparation and installation. This tile has an R9 slip rating.
The marble-effect design brings natural-looking movement without relying on a single repeated print. Mix the different faces during installation so veining is distributed attractively across the finished area.
The visual character of this tile is designed to give the room a considered finish rather than a flat, repetitive surface. The colour mix of White, Grey makes it easy to coordinate with complementary cabinetry, sanitaryware, worktops, timber and painted surfaces.
Calacuta matt tile 600×600 has a 9mm thickness and porcelain construction. Box coverage and intended use are listed in Key Information.
This tile is suitable for internal walls and floors. It can therefore be considered for bathrooms, kitchens, hallways, living rooms, bedrooms and internal feature walls, subject to correct substrate preparation and installation. This tile has an R9 slip rating.
For bathrooms, showers and other wet areas, use a suitable tanking or waterproofing system where required, together with adhesive and grout appropriate for the substrate, tile type and environment.
The marble-effect design brings natural-looking movement without relying on a single repeated print. Mix the different faces during installation so veining is distributed attractively across the finished area.
Its White, Grey tones can be kept soft with warm neutrals and light timber, or given more contrast with darker metalwork, cabinetry and accessories. Review the product images when planning the colour scheme for your room.
Each box contains 4 tiles and covers approximately 1.44 m². The Timberwharf calculator uses this box coverage to round the quantity to complete boxes.
Allow extra material for cuts, breakages, pattern alignment and future replacements. Around 10% is commonly used for straightforward installations, although complex layouts, chevrons and very large formats can require different allowances and should be planned with the installer.
For current delivery information and regional charges, see the Timberwharf Delivery Policy.
Install onto a sound, clean, level and suitably prepared substrate using fixing products appropriate for porcelain and the intended application. Check all pieces before fixing and dry-plan the layout where face variation, veining or pattern direction is important.
Mix material from several boxes during installation where practical. For large-format products, use suitable handling and fixing methods and follow the adhesive manufacturer’s coverage requirements. Clean with products compatible with the tile, grout and surrounding finishes.
Shade, tone, veining and surface movement can vary between pieces and production batches. Product images are representative, and screen settings or lighting can change the apparent colour.
Suitable for internal wall and floor use.
This tile has a Matt finish.
One box covers approximately 1.44 m² and contains 4 tiles.
Yes. This tile is rectified.
