£23.70 per m²
Antiqua Beige 600 × 1200mm is a warm beige stone-effect porcelain tile with sandy, taupe and cream movement. The layered stone-inspired pattern combines soft tonal movement with pale mineral-style veining, creating a natural look that works comfortably in both modern and classic interiors.
The 600 × 1200 mm format is made from rectified porcelain and is specified by the supplier for internal wall and floor use. The large rectangular format creates a strong architectural look with fewer grout joints than smaller tiles. An R9 slip rating adds practical everyday performance for general internal floor areas.
Choose Antiqua Beige 600 × 1200mm when you want the warmth and movement of natural stone in a durable porcelain format. Its larger rectified size is particularly effective across spacious floors and full-height feature walls, while the 11 faces provide enough variation to avoid a repetitive appearance.
Bathroom Tiles: Suitable for bathroom walls and general internal bathroom floors. For wet-room or shower-floor projects, confirm the required slip performance with your installer.
Kitchen Tiles: Suitable for kitchen floors, kitchen walls and feature areas, including splashback-style installations where the tile size suits the design.
Hallway Tiles: A practical porcelain option for internal hallway floors, with the stone-effect pattern helping disguise everyday visual wear.
Living Room Tiles: Works well across living rooms and open-plan interiors where a natural stone look is wanted without using natural stone.
Bedroom Tiles: Suitable for bedroom floors and selected feature walls.
Shower Walls: Suitable for internal shower walls when installed over a correctly prepared waterproof substrate. R9 should not automatically be treated as approval for a shower floor.
Pair the warm beige tones with natural oak, walnut, warm white, greige cabinetry, brushed brass or black accents. A grout colour close to the tile tone will keep the large-format installation looking calm and continuous.
Each box contains 3 tiles and covers 2.16 m². Enter the area you need into the Timberwharf calculator and the quantity will be rounded up to complete boxes. Allow additional material for cuts, breakages and future replacement, particularly where the room has complex edges or patterned layouts.
Install on a clean, flat and correctly prepared substrate using fixing products suitable for porcelain. The supplier technical sheet specifies C2 cementitious adhesive performance above 1.0 N/mm². Its rectified edges support a precise, contemporary installation with consistent joints.
Use a pH-neutral tile cleaner for routine care and avoid abrasive products that could affect the surface or grout.
Images are a guide only. Tone, veining and pattern placement vary between faces, lighting, screens and production batches. Check and mix tiles before installation and order enough material for the complete project at the same time.
Can this tile be used on both walls and floors?
Yes. The supplier specifies this Antiqua tile for internal wall and floor use.
Is it rectified?
Yes. This size is rectified.
What is the slip rating?
R9. This is suitable for general internal flooring, but the required rating for wet areas should be checked for the specific project.
How much does one box cover?
3 tiles cover 2.16 m².
How much variation should I expect?
The technical sheet lists 11 faces, helping create a more varied stone-inspired appearance.
