£23.70 per m²
Bodo Beige 600 × 1200 mm is a warm beige stone-effect porcelain wall and floor tile with delicate pale veining and soft tonal movement. The understated pattern gives the surface the character of natural stone while keeping the overall look calm and easy to coordinate.
The 600 × 1200 mm format is specified by the supplier for internal wall and floor use and carries an R10 slip rating. It has 5 faces to introduce natural-looking variation across the installation. Its rectified edges support a precise, contemporary layout with clean, consistent grout joints when installed correctly.
The 600 × 1200 mm format gives bathrooms, kitchens and open-plan floors a strong large-format appearance without moving to an oversized square slab. Rectified edges keep the finished surface crisp and contemporary.
Bathroom Tiles: Suitable for internal bathroom walls and floors. Confirm the required slip performance for the exact wet-area application.
Kitchen Tiles: Suitable for kitchen floors, walls and splashback areas.
Hallway & Living Areas: The durable porcelain body and neutral stone effect work well across hallways, living rooms and open-plan spaces.
Bedroom Floors: Suitable where a durable tiled floor is preferred.
Shower Areas: Suitable for internal shower walls over a correctly prepared waterproof substrate. For shower floors, confirm the slip requirement for the specific project.
The warm beige stone effect pairs naturally with oak and walnut tones, cream or off-white cabinetry, textured neutrals and black, chrome or brushed-brass fittings. Use a close beige grout for a softer continuous look or a slightly contrasting grout to define the tile format.
Each box contains 3 tiles and covers 2.16 m². Enter the area you need into the Timberwharf calculator and the quantity will be rounded up to complete boxes. Allow extra material for cuts, breakages and future replacement.
Install on a flat, clean and correctly prepared substrate using fixing products suitable for porcelain and the installation area. Follow the adhesive and grout manufacturer’s instructions and use appropriate waterproofing in wet areas.
Use a pH-neutral cleaner for routine care. Avoid strongly abrasive cleaning products unless specifically approved for porcelain and grout.
Images are a guide only. Tone, veining and pattern placement can vary between faces, lighting, screens and production batches. Check and mix tiles before installation and order enough material for the complete project at the same time.
Can Bodo Beige be used on both walls and floors?
Yes. The supplier specifies this Bodo tile for internal wall and floor use.
Is this size rectified?
Yes. This size is specified as rectified porcelain.
What is the slip rating?
R10. Confirm the required slip performance for the exact project, particularly wet floor areas.
How much does one box cover?
3 tiles cover 2.16 m².
How much visual variation is listed?
The technical sheet lists 5 faces.
