£29.90 per m²
188 in stock
| Style | |
|---|---|
| Shape | Rectangular |
| Colour | |
| Size | 300 × 600 mm |
| Material | Porcelain |
| Finish | Matt |
| Suitability | |
| Rectified Edge | Yes |
Betonico Black 300 × 600 mm is a rectified porcelain wall and floor tile with a calm, finely textured concrete-effect appearance. The understated surface gives modern interiors a clean architectural look without overwhelming the rest of the room.
The supplier specifies Betonico as rectified porcelain for internal wall and floor use. With an R10 slip rating, low water absorption and strong technical performance, it is a practical choice for bathrooms, kitchens, hallways, living areas and suitable commercial interiors.
Betonico Black combines a restrained concrete-inspired look with the durability and low water absorption of porcelain. The rectangular format works well in modern residential interiors, while the rectified edge helps create clean grout lines and a more seamless overall finish.
Bathroom Tiles: Suitable for internal bathroom walls and floors. The R10 rating provides useful slip resistance for general internal floor areas.
Kitchen Tiles: Suitable for kitchen floors, walls and feature areas where a contemporary concrete-effect surface is wanted.
Hallway Tiles: Strong porcelain construction makes Betonico suitable for internal hallway floors.
Living Room & Bedroom Tiles: Suitable for modern living spaces, open-plan rooms and bedrooms where a calm, neutral floor or feature wall is preferred.
Commercial Interiors: The supplier presentation recommends the range for commercial spaces; suitability should always be checked against the specific project’s traffic and installation requirements.
Shower Areas: Suitable for internal shower walls. For shower or wet-room floors, confirm the R10 rating is appropriate for the specific project and local requirements.
Betonico Black works naturally with timber, warm whites, black fittings and simple stone or solid-surface worktops. Keeping grout close to the tile tone creates a quieter, more continuous finish; a contrasting grout gives the tile layout more definition.
Each box contains 7 tiles and covers 1.26 m². Enter the area you need into the Timberwharf calculator and the quantity will be rounded up to complete boxes. Allow extra material for cuts, breakages and future replacement.
Install on a flat, clean and correctly prepared substrate using fixing products suitable for porcelain and the installation area. Rectified tiles need careful setting-out and consistent joints for the best result.
Use a pH-neutral cleaner for routine care. Avoid strongly abrasive cleaning products unless specifically approved for porcelain and grout.
Images are a guide only. Colour, texture and appearance can vary with lighting, screens and production batches. Check tiles before installation and order enough material for the complete project at the same time.
Can Betonico be used on both walls and floors?
Yes. The supplier specifies the range for internal wall and floor use.
Is it rectified?
Yes. Betonico is specified as rectified porcelain.
What is the slip rating?
R10.
How much does one box cover?
7 tiles cover 1.26 m².
How many faces are listed?
The technical sheet lists 1 face.
